background image

17

9. Warranty

9.  Zodiac Australia reserves the right to determine, in relation to each warranty claim, whether the 

Product should be returned to the Authorised Dealer at the address where the Purchaser purchased 
the Product or whether warranty service will be provided in the field, repaired at a Zodiac workshop 
or at the premises of an authorized Zodiac warranty agent.

10.  If it is necessary for the Purchaser to incur freight charges in making a valid claim under this 

warranty, Zodiac Australia will reimburse the Purchaser for charges reasonably incurred upon proof 
of the charges.

Additional guarantees, rights and remedies

Australian Purchasers – Guarantees under the Australian Consumer Law

11.  The benefits of this express warranty are in addition to other guarantees, rights and remedies 

Australian consumers have under the Australian Consumer Law.

12.  Zodiac Australia products come with guarantees that cannot be excluded under the Australian 

Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation 
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods 
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a 
major failure.

Purchasers in other Countries

13.  The laws and regulations of other countries may confer on Purchasers in those countries additional 

rights and remedies. To the extent that they cannot be excluded or modified, Purchasers have the 
benefits of those rights and remedies in addition to the benefits of this express warranty. To the full 
extent that it is permissible to do so, those additional rights and remedies are excluded or modified 
so as to be consistent with Zodiac Australia's express warranty.

INCONSISTENCY WITH WARRANTY STATEMENTS IN PRODUCT MANUALS 
OR OTHER DOCUMENTS ACCOMPANYING PRODUCTS

If any warranty statements in a Zodiac Australia product manual or other document are inconsistent 
with the above Express Warranty and Guarantees, the above overrides and replaces the inconsistent 
statements.

10.  Online registration

Registration on line

Register your product on our website:
•  you will be the first to be informed of new Zodiac products and special offers,
•  You can help us to constantly improve the quality of our products.
Australia – New Zealand 

www.zodiac.com.au

Summary of Contents for pH Perfect





















Reviews: