Zodiac NOOSA REEF, Instruction Manual, Page: 42 / 64

WALL ASSEMBLY
40
A C
Pool Wall Coving
STEP 31.
SPREADING AND LEVELLING THE SAND
Using a tape measure and permanent marking pen mark a line around the inside perimeter of the pool 150mm up from the
bottom edge of the wall.
b. Use the wooden screed (2m) to level the sand before rolling approx 75mm deep (50mm after rolling)
c. Build an even coving of sand around the wall of the pool approximately 200mm high + compact tightly
(150mm after compacting) up to the line around the inside perimeter of the pool.
NOTE: The coving is critical to stop the liner from going under the wall when filled with water.This will be the finished
compact level of the sand coving.
IMPORTANT SAND SHOULD BE DAMP BUT NOT WET TO COMPACT THE SAND CORRECTLY.
B
200 mm
150
mm
50 mm