4
7.
Install your Nature
2
Express on schedule 40 PVC pipe only.
Failure to heed this warning can result in equipment failure.
Position the clamp assembly on the pipe, with the arrow pointing in
the direction of the flow of water and hand tighten the nuts and bolts.
Tighten nuts an additional 1/4 turn using a wrench or socket. Do
not over-tighten.
Note
: The 2 halves of the 1-1/2” clamp assembly will not touch when
properly assembled. A gap of roughly 1/16” is normal.
8. Insert the hole saw into a drill. Using the hole in the top half of the
clamp assembly as a guide, cut a hole in the pipe.
