5
9. Insert the flow diverter into the clamp assembly and snap it into place.
Snap the outer housing onto the clamp assembly.
10. Spread silicone around the o-ring just above cartridge threads.
11. Thread the Nature
2
Express cartridge into the clamp assembly.
Set the date reminder.
12. Open any valves that you closed and turn on your pool pump to verify
that there are no leaks. The small pellets inside the cartridge dome
provide evidence of water flow through your Nature
2
Express.
If a leak is present: turn off pump, close valves, and remove Nature
2
Express and assembly. Remove any PVC burrs, replace clamp
assembly without over-tightening, and re-install cartridge.
13. Refer to your Nature
2
Cartridge Owner’s Manual for cartridge start
up procedures.