14
4.4 I Replacing the tracks
•
Lay the cleaner on one side.
•
Starting with one of the wheels, pull the inside of the track to separate it from the wheel
(see image ).
Then remove
the track from the cleaner.
•
To install the new track, position the inside of the track on the small wheel's grooves and on one of the large wheels.
•
Stretch the track around the second wheel,
(see image )
. Press down on the track to position it correctly on the
wheel grooves. Make sure that the track passes under the guide.
4.5 I Storage and winterizing
•
For winterizing, drain off all the water from the cleaner (damage caused by frost is not covered by the warranty).
•
Clean the whole device and the hoses in clean water then leave to dry.
•
Store the device in a dry place which is protected from freezing conditions. Store the cleaner on its side or back to
avoid damage to turbine (voir
image
).
•
Remove all the connectors and adaptors from the suction line or the skimmer.
Tip: Preserve the condition of the hoses during storage
When the cleaner is stored away, even for short periods, avoid rolling the hoses: they may take on a shape
which may harm the cleaner's performances.
