![background image](http://html1.mh-extra.com/html/zodiac/milpro-erb-380/milpro-erb-380_manual_936174006.webp)
Assemble the boat on a smooth clean surface.
IF THE BOAT IS STORE
UNFOLDING, LET IT WA
TEMPERATURE, 20°C.
ASSEMBLING THE H2P FLOOR
•
Place the deflated
floor at the bottom of
the boat; and make
sure the deflated
floor is correctly
placed in the corner
reinforcements.
•
Tighten the
buoyancy tube /
floor and
transom/floor
fixation buckles.
•
Lace the H2P floor
to the fabric flap pat
the bow
BOAT ASSEMBLY
Assemble the boat on a smooth clean surface.
IF THE BOAT IS STORED AT A TEMPERATURE BELOW 0°C, BEFORE
UNFOLDING, LET IT WARM UP FOR 12 HOURS A
TEMPERATURE, 20°C.
LOOR
Securing the floor to the
transom:
Slide the after line into the
batten’s groove.
ELOW 0°C, BEFORE
RM UP FOR 12 HOURS AT ROOM
Securing the floor to the
Slide the after line into the