![background image](http://html1.mh-extra.com/html/zodiac/medline-7-5/medline-7-5_manual_4009622040.webp)
Page 40 / 55
Issue 2
INSTALLATION AND CIRCUIT - DRAINING
V-3-3-Bilge pump
USE
The bilge pump is not wired to the battery switch and operates independently; the control switch
is always ON.
Automatic operation (set position): in this position, the bilge pump operates automatically. The
indicator light is on.
When at anchor, even for several months, it is normal that the bilge pump indicator is on. A pilot
light will not empty your battery.
Off: in this position (set position), the bilge pump is off. The indicator light is off.
This position should almost never be used, except when the boat is out of the water and sheltered.
Forced operation: the switch has to be held depressed to operate it. As soon as you release the
switch, it returns to automatic position (1).
ZODIAC recommends the use of a tarpaulin or mooring cover in order to
prevent water ingress in the event of rain.
Ensure that the system is in working order (unblocked pipes, plugs out, bilge
pump switch on automatic mode, battery charged).
WARNING
At anchor, set the bilge pump switch to the automatic position.
WARNING!
The bilge pump system is not designed to keep in check water
coming from a breach in the hull. It is the owner's responsibility to
have at least one bailer on board with a system to prevent its
accidental loss.
Position
Stop -2
On position
Automatic- 1
On position
Forced -3
Summary of Contents for MEDLINE 7.5
Page 28: ...Page 28 55 Issue 2 INSTALLATION AND CIRCUIT ELECTRICAL 16 17 ...
Page 31: ...Page 31 55 Issue 1 E N G L I S H INSTALLATION AND CIRCUIT ELECTRICAL 17 ...
Page 46: ...Page 46 55 Issue 2 VI 1 POSITION OF LABELS 3 4 5 6 1 2 7 ...
Page 47: ...Page 47 55 Issue 1 E N G L I S H LABELLING VI 2 DESCRIPTION OF LABELS ...