![background image](http://html1.mh-extra.com/html/zodiac/medline-7-5/medline-7-5_manual_4009622018.webp)
Page 18 / 55
Issue 2
BUOYANCY TUBE - INFLATING THE BUOYANCY TUBE
PRESSURE GAUGE
WARNING!
Do not use a compressor or compressed air cylinder.
INFLATION
1/
Place all valves in inflation position.
2/
Fit the adaptor that matches the diameter of the "easy-
push" valve to the inflation tube tip.
3/
Attach the hose connector to the inflation pump inflation
valve.
To inflate your buoyancy tube properly, the inflation pump
should be correctly placed on the ground.
The tube inflates rapidly if the inflation pump is used smoothly
and without haste.
4/
Inflate the buoyancy tube, starting with the first compartment (a) at the bow, to 200 mb pressure.
5/
Then inflate the amidships tubes (b), to 220 mb read on the pressure gauge on the first
compartment.
6/
Then inflate the stern compartments (c) to 240 mb, with the pressure gauge still on the first
compartment. The partitions (1) enable the pressure between each tube to balance out.
7/
Inflation is completed: screw on the inflation valve plugs.
Summary of Contents for MEDLINE 7.5
Page 28: ...Page 28 55 Issue 2 INSTALLATION AND CIRCUIT ELECTRICAL 16 17 ...
Page 31: ...Page 31 55 Issue 1 E N G L I S H INSTALLATION AND CIRCUIT ELECTRICAL 17 ...
Page 46: ...Page 46 55 Issue 2 VI 1 POSITION OF LABELS 3 4 5 6 1 2 7 ...
Page 47: ...Page 47 55 Issue 1 E N G L I S H LABELLING VI 2 DESCRIPTION OF LABELS ...