17
16
ADVICE
During the season, you are advised to leave your Manta II
in the pool.
If you wish to remove it while bathing, remove
the hose, but do not roll it up. (1)
Never expose the hose to direct sunlight.
ASSEMBLY
This unit comes fully assembled.
All you have to do is fix it:
• the grey disk, with the face marked “Top” uppermost,
on the flexible foot. The disk must be correctly
positioned in the throat of the flexible foot and
should be able to rotate freely. (2)
• the small available circular deflector
using the hose adapter as shown
in the diagram opposite. (3)
FITTING THE HOSE
Your Manta II hose is made up of 10 x 1 m sections.
• The ideal hose length for your pool is the greatest
distance your Manta II will reach from the point
of connection plus one hose section, i.e. the skimmer
or vacuum point, to the furthest lower corner of your
pool. (4)
• After calculating the correct overall length, assemble
your hose by fitting the sections together.
• A hose weight is provided to reduce the buoyant effect
of the hose. The buoyancy of the hose tends to lift
the Manta II especially in deeper water.
Ensure the disc sets flat on the pool surface
by adjusting the hose weight about 0,5 m from
the automatic pool cleaner. (5)
Connect the hose to the automatic pool cleaner.
Maximum distanc
e to
be c
ove
red
Length of hose = maximum distance
+ 1 section of 1 metre
1
incorrect
correct
incorrect
Hose adapter
(female end)
Outer extension
hose
Small deflector
wheel
2
3
4
50 cm
Hose weight
5
8082/Notice Manta II A4 13/10/04 14:46 Page 16
