background image

23

PROBLEM SOLVING

To be checked

• Check the system is tight: between the automatic pool

cleaner and hose, between each of the hose sections,
between the hose and  the valve, between the valve
and the skimmer.

The problem is undoubtedly because the Manta II is not
assembled in the way best suited to the shape and
obstructions in your pool.

You have four options:

• Lastly, you can fit the large circular deflector to the

hose adapter after the short hose fixed to the cleaner
(20),

If none of these options resolves the problem, 
connect the hose to the vacuum point the furthest away
from the steps, or shorten the hose to prevent it from
coming to rest on the steps.

• You can also fit the small circular deflector to the hose

adapter, after the short hose fixed to the cleaner (19),

• You can fit the large circular deflector instead of the

small one with the hose adapter immediately after the
cleaner (18),

Problem

The Manta II moves very slowly
and air bubbles appear 
in the flow:

The Manta II jams against 
the ladder or steps:

Problem

The Manta II does not clean 
all parts of the pool:

The Manta II will not stay 
on the bottom of the pool:

The Manta II jams 
on the main sump:

The Manta II jams 
against the light:

The Manta II is over 
the water line:

The Manta II lies down:

PROBLEM SOLVING

To be checked

• To ensure that the entire pool is cleaned the filtration

system operating time can be reduced. For example, 
6 hours filtration in two hour sessions will give better
coverage of the pool than single 6 hour filtering
session.

• Make sure your hose is long enough and add sections

if necessary.

• Direct the inlet jets towards the bottom of the pool.

• Check the condition of the hose (see storage advice

page 16).

• Make sure the hose weight is correctly installed 

(see diagram 5).

• Close the main drain.

• Check whether the main drain grill is properly fixed.

• Fit the light correctly.

• Use the control valve or adjust the opening of the

skimmers to regulate the flow of water passing
through the automatic pool cleaner.

• If the automatic pool cleaner is unbalanced, the Manta II

must be returned to the manufacturer for repair.

18

19

20

22

• You can fit the small circular deflector to the hose

adapter immediately after the cleaner (17),

17

8082/Notice Manta II  A4  13/10/04  14:46  Page 22

Summary of Contents for Manta II








Reviews: