ENGLISH
E - 5
4. SETTINGS AND OPERATIONS
4.1 Installation Wizard (First time Installation)
·
Turn on your TV and receiver.
·
If it is the first time using a receiver, you should set parameters for system configuration. Press the MENU
button. Refer to the following section for detailed information about System configuration
1. Language setting (see fig. page I - 12)
Choose your preferable language.
2. UHF Setting (European Standard) (see fig. page I - 12)
Choose your UHF channel.
3. Edit satellite (see fig. page I - 12)
Choose your preferable satellite by OK button. If you don't choose satellite, press OK button again. If you want
to more next performance, press EXIT button.
4. Antenna Setting (see fig. page I - 13)
While cursor key is on satellite, if you press OK button, you can select satellite. While cursor key is on LNB
Type, if you press OK button, it will show LNB frenquency. While cursor key is on motor setting, if you select
"enable" and press OK button, it will show how to set up DisEqc 1.2
5. Automatic Search (see fig. page I - 13)
You can choose quick & detail search by Left/Right key if you choose detail search, you can add symbol rate.
6. Time Setting (see fig. page I - 13)
Correct your time.
Tips
How to use the icons
Search Channel
Edit
Setup
Tools
Common Interface
