THANK YOU FOR PURCHASING THIS ROBOTIC POOL CLEANER BY ZODIAC
®
.
YOUR CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED AND TO
PROVIDE LOW MAINTENANCE OPERATION. A WARRANTY CARD IS SUPPLIED IN THE BOX. PLEASE GO
TO ZODIAC.COM.AU TO REGISTER FOR WARRANTY.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required, please
contact your original dealer. If the original dealer does not perform warranty service, please visit
www.zodiac.com.au to locate an independent service company near you. If you are unable to locate a service
company, please call our Customer Service Team at 1300 763 021.
Section 1. Important Safety Instructions ........ 3
Section 2. Getting Started ................................ 4
2.1 General Specifications ...................................... 4
2.2 Recommendations for Use ................................. 4
2.3 Unpacking .......................................................... 4
2.4 Assembling the Transport Caddy ....................... 5
2.5 Connecting the Control Unit to the Caddy .......... 6
2.6 Connecting to a Power Source ........................... 7
Section 3. Operation ......................................... 8
3.1 Submerging the Cleaner .................................... 8
3.2 Cleaner Control box ........................................... 8
3.3 Starting the Cleaner ........................................... 9
3.4 Wall Climbing
(Surface Control System) ................................. 10
3.5 Stopping the Cleaner
and Removing from the Pool ............................ 10
3.6 Rinsing the Cleaner ...........................................11
3.7 Cleaning the Filter Canister ...............................11
3.8 Storing the Cleaner ......................................... 12
Table of Contents
Section 4. Maintenance .................................. 13
4.1 Avoid Cord Tangling ......................................... 13
4.2 Check for Brush Wear ...................................... 14
4.3 Storing the Cleaner ......................................... 14
4.4 Replacing the Brushes ..................................... 14
4.5 Replacing the Track .......................................... 15
Section 5. Troubleshooting ........................... 17
5.1 Using the Information LED ............................... 17
5.2 General Troubleshooting .................................. 18
Section 6. Conformity .................................... 19
2
H0574000_REVA