![background image](http://html1.mh-extra.com/html/zodiac/20-xa/20-xa_instructions-for-installation-and-use-manual_936546009.webp)
8
2.2 Attachment to the base
2.3 I Electricity supply connection
In order to avoid any risk of electrocution, fire or serious injury, please follow the instructions
below:
•
Use of an electrical extension is prohibited when connecting the control box.
•
Make sure that the socket can be easily accessed at all times and is protected from rain or
splashes.
•
The control box is impervious to spray but must not be immersed in water or any other liquid.
It must not be installed in a floodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
•
Place the control box near the socket.
•
Connect the floating cable into the control box (see figure ).
•
Push the connector in until you hear 2 clicks (see figure ). Make sure the connector is sufficiently pushed into place.
If it is not, repeat the operation.
•
Connect the power cord (see figure )
.
Only connect the control box to a power outlet protected by a 30 mA
maximum residual current device
(if in doubt contact a qualified technician)
.
•
To disconnect the floating cable from the control box, pinch the 2 clips at the end of the connector and pull at the
same time (see figure )
.
CLICK
CLICK