ZMIO310 Vertical Bus Expansion Module User Manual V1.0
10
EARTH
Output
Output 9
11
OUT8
-
Reserved
12
OUT9
-
Shield
13
OUT10
Output
Output 10
14
OUT11
Output
Output 11
15
OUT12
Output
Output 12
16
OUT13
Output
Output 13
17
OUT14
Output
Output 14
18
OUT15
Output
Output 15
19
E+24V
Power supply (+)
24V power input (+)
20
EGND
Power supply (-)
24V power input (-)
→
Terminal Wiring
➢
Please use tubular pre-insulated terminals and wire cable that is suitable to wire path
to do user terminal wiring
→
Cable production steps:
➢
Strip the cable insulation, the exposed copper part depends on the size of the tube-
type pre-insulated terminal.
➢
Pass the conductor part of the cable into the tubular pre-insulated terminal and crimp
it with a crimping pliers.
→
Wire cable connection steps:
➢
Press the spring of the terminal to insert the cable with the tubular pre-insulated
terminal into the port.
➢
Loosen the spring of the terminal, pull the cable lightly to check whether the cable is
firmly connected.
→
Note:
➢
When routing terminal cables, avoid bundling them with cables with strong
interference signals such as power cables, and route them separately.
➢
In the case of serious electromagnetic interference on site, shielded cables should
be selected to improve the anti-interference ability.
➢
It is not recommended to use the same power supply for the coupler module and the
