ECI3808 Network Motion Control Card User Manual V1.5
Connector
Crystal head with iron shell
Cable material
PVC
Cable length
Less than 100m
Use RJ45 network cable connection method:
⚫
When installing, hold the crystal head that is with the cable and insert it into the RJ45
interface until it makes a "click" sound (kada).
⚫
In order to ensure the stability of communication, please fix the cables with cable ties.
⚫
When disassembling, press the tail mechanism of the crystal head, and pull out the
connector and the module in a horizontal direction.
Please use tube-type pre-insulated terminals and cables with appropriate wire
diameters to connect the user terminals.
3.8.
ENCODER Auxiliary Encoder
This product provides one auxiliary encoder interface, each interface is a standard
DB26 female socket.
→
Interface Definition
Interface
Pin
Signal
Description
1
EA-
Encoder differential input signal A-
2
EB-
Encoder differential input signal B-
3
EZ-
Encoder differential input signal Z-
4
Spare
Reserved
5
+5V
5V power positive of pulse/encoder signal
6
EA+
Encoder differential input signal A+
7
EB+
Encoder differential input signal B+
8
EZ+
Encoder differential input signal Z+
9
GND
5V power negative of pulse/encoder signal
Summary of Contents for ECI3808
Page 1: ......