ECI0016PA Data Capture Card User Manual V1.5
→
Expansion Resources Checking:
According to CAN wiring, after powered on, and all resistor codes were set correctly,
POWER, RUN and IO POWER should be ON, ALM is OFF. At the same time, it shows
expansion
module
information
and
expanded
IO
range
number
in
“ZDevelop/Controller/State the controller/ZCanNodes”.
When connecting multiple expansion modules, DIP ID and corresponding resources
No. are below:
If ALMRM led is ON, please check wiring, resistor, DIP setting, CANIO_ADDRESS
setting (should be 32 master station) and CAN communication speed.
Summary of Contents for ECI0016PA
Page 1: ......
