10
2
Menu Operations
Press
[
SET
]
button to enter into system setting
screen. Press
[
●
]
button to start/stop recording
manually. Press
[
►
]
button to play record file.
Press
[
PTZ
]
button to enter into PTZ control screen.
Note:
This manual shows the Menu selection icons and selection boxes in
〖
XX
〗
; the buttons in the menu
screen (except menu selection icons) in<XX>; the buttons on front panel and remote controller in
【
XX
】
The highlighted menu is the active menu. Users can change the highlighted icon to the menu needed using
【
▲
】、【
▼
】、【 】、【 】,
button, and pressing
【
OK
】
button to confirm selection, or pressing
【
ESC
】
button to return to previous menu.
Selection box: Users can change the highlighted icon to the selection box needed using the
【
◄
】、【
►
】
buttons, and press the
【
OK
】
button to confirm selection. Multiple items are allowed to be selected together
at once by left clicking on the mouse.
Sub menu list: Users can change the highlighted icon to the sub menu needed using
【
◄
】 【
►
】
buttons, or by using the scroll wheel on the mouse to select directly. Only one item can be selected
here.
Edition box: when in edition box, user can type in numbers directly by pressing number buttons. Press
【
DEL
】
to delete the character before cursor and press
【
OK
】
or
【
ESC
】
button to exit.
Sub screen button: Press it to pop up sub screen. When in sub screen, select
〖
Confirm
〗
to save
configuration and return to the upper menu. Press
【
ESC
】
or select
〖
Cancel
〗
to return to the upper
menu without being saved.
Use
【
◄
】、【
►
】
to move highlight icon to any of the selection boxes. Press
【
OK
】
button to switch to
another selection status. Use
【
▲
】、【
▼
】
to specify the sub menu value, where a sub menu selection
exists. Exit: User can click
button on the right upper corner, or single right click mouse, or press
【
ESC
】
button to enter into the Save & Exit screen. From here you may choose to save your changes and then exit
or just exit.
Chapter Four: Operations
This chapter mainly describes the main system operations of DVR. Please see the following contents
for details.
1
Power on the DVR
*
Start-up
The Power LED will light after powering on correctly. Please refer to 2.6 Rear Panel Connection for details
of the connection method. Press
【
Power on/off
】
button to start up device. The preview screen will
appear. After pressing the
【
ESC
】
button on the front panel or remote, or right clicking mouse, the login
box appears. Here you will select your user ID and enter the appropriate password.
Note1
: Start up may take anywhere from 1-2 minutes. Please be patient.
Note2
: You may modify passwords by selecting <Tool
Bar>→<System>→<System Setting>→<Password
Setting>.
Enter the current password, then you may enter your new password, confirm it, and click ok. The
new password will take effect immediately.
Note3
:
Default password for Admin is 111111. Default password for User is 111111;
Admin password
can be restored to factory defaults by short-circuit
“JP 1” on the motherboard. After logging in to the DVR as
Admin, the Admin user can change other user
’s passwords. The system supports 8 users, and the Admin is
the account manager with all permissions, whose name cannot be deleted or changed. The Admin user can
add and delete all other users and permissions with those corresponding users.
Note4:
The DVR can identify display devices automatically. When connected either to VGA or TV, the
menu will be on the specified screen automatically after start-up; when connecting VGA and TV
simultaneously, two images will be displayed on the screen, but the menu system will display only on the
currently selected video output. The user may switch the output by clicking the
icon
in the tool bar.
*
System settings
Language: Please enter<Tool
Bar>→<System>→<System Setting>→<Language> to set language.
VGA Resolution: Please enter<Tool
Bar>→<System>→<System Setting>→<VGA Resolution> to set VGA
resolution and refresh rate. It supports 800×600@60Hz
、
1024×768@60Hz
、
1280×1024@60Hz
、
1440×900@60Hz currently.
WARNING
: Setting an inappropriate resolution will give you a blank screen.
