Zlpower EX series, User Manual

Page: 14 / 36

10
current please refer to 1.4)
1. Select proper wire according to wiring table
2. Open the terminal block cover
①
on the back panel of UPS
3. Connect the input and output wires to the corresponding input and output
terminal, if need connect batteries then connect the battery cables to the battery
input terminal.
4. Lock input, output and battery wire on self-locking frame
②
by self-locking cable,
regulate the position of self-locking cable and fix it.
Note: you must make sure that the input and output wires and the input and output
terminals are connected tightly.