Zline 697-R-30, Installation Manual And User'S Manual

Page: 46 / 103

39
Changing Baffle Filter
s
PROFESSIONAL SERIES BAFFLE FILTER CHANGE
Covering Models 696, 697, 697i (Island), KECOM, KECOMi (Island), 695, 698,
and 721 Inserts
Professional series hoods are equipped with 2 removable dishwasher safe baffle
channels (one for series 695 and 698 inserts) that the baffle filters rest in. To install
the channels, place inside the hood, right under the front and back edges of the hood.
The channel is kept in place by installation pieces on the sides and back of the baffle
channel.
Figure 1
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
NOTE: The baffle channels may already be in place. See Figure 1 for positioning.
To install filters, first install the removable baffle channel. Next, take the filter and put
one end into the permanent baffle channel. Push back into place and pull down,
sliding the bottom of the filter in. Position filters so that they rest on both lips of the
baffle channels.
Figure 2
WARNING: Edges on the baffle filters and baffle channels may be
sharp- please use caution when installing and removing. Do not attempt to
disassemble baffle filters, as the process may result in injury.
CHANGING PARTS
Figure 1 Figure 2
WARNING