ZLG CANFDNET-200U, User Manual

Page: 9 / 33

CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual
©2021 Guangzhou ZLG Electronics Co., Ltd.
6
User Manual
ETH0 Ethernet indicator
Green normally on Ethernet connected
Light off Ethernet no connected
Green flashing The application has data transmission and
reception
Flash in red Received data parsing error
ETH1 Vehicle Ethernet Indicator
Green normally on Ethernet connected
Light off Ethernet no connected
Green flashing The app has data transfer
LAN0
RJ45 interface indicator - yellow
indicator
The yellow indicator is on Ethernet connection, no data transmission
and reception
The yellow indicator blinks The Ethernet has data transmission and
reception
Light off Ethernet no connected
RJ45 interface indicator - green
indicator
The green indicator is on Ethernet speed 100Mbps
Light off Ethernet speed 10Mbps
4.3 Buttons
The device provides the factory settings restoration (DEF)/system reset (Reset) button. After pressing the
button, release it within 2 seconds to reset the device; if you press and hold (5 seconds) the button until the
system indicator SYS turns red, the device restores its factory settings automatically.
4.4 Power Interface
The rated voltage of the power input of the equipment is DC 9-48 V, and the shell is marked as "DC 9-48V".
The physical form of the interface is 5.08 terminal. Table 4.2 and Table 4.3 show the interface diagram and signal
definition.
Table 4.2 Power interface
Type Schematic Diagram
5.08 terminal
Table 4.3 5.08 terminal signal definition
Function Interface Signal Definition Signal Description
Interface Type
5.08 Interface
Power supply
V+ Positive electrode of power
√
V- Negative electrode of power
√
EARTH Ground
√
4.5 CAN-bus Interface
The device provides two isolated CAN-Bus interfaces. The shell identification is "CAN0" and "CAN1". The
physical form of the interface is DB9 terminal. Table 4.4, Table 4.5, Table 4.6, and Table 4.7 list the interface
diagram, signal definition, and interface specifications.
Table 4.4 CAN channel performance
Channel Transmission Direction Maximum Rate (unit: frame/s)
CAN0 Receive 6,000 frames/s