ZLG CANFDBridge Smart User Manual Download Page 38

Page: 38 / 40

CANFDNET-400U

High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual

User Manual

5. Firmware Upgrade

To improve the device maintainability, CANFDBridge provides the IAP firmware

upgrade function. CANCfg software facilitates CANFDBridge upgrades. The interface

related to the upgrade function in the software is shown in the red box in Figure 5.1. Click

to select the path of the firmware to be upgraded, and then click

start the firmware upgrade. After the upgrade starts, a window as shown in Figure 5.2 will

appear, showing the upgrade progress and status. During the upgrade, the USB indicator

will flash rapidly. During the upgrade, do not power off the device or disconnect the USB

cable; otherwise, the upgrade will fail. If the upgrade fails, the CANFDBridge device does

not work properly, and the USB indicator keeps flashing. At this time, reconnect the device

to the computer and perform a firmware upgrade.

Figure 5.1 Firmware upgrade

Figure 5.2 Firmware upgrade completed

Summary of Contents for CANFDBridge Smart









































Search results

Summary of Contents for CANFDBridge Smart

Reviews:

Related manuals for CANFDBridge Smart

Brands by name

Popular brands

ZLG CANFDBridge Smart, User Manual

Search results

Summary of Contents for CANFDBridge Smart

Reviews:

Related manuals for CANFDBridge Smart

Brands by name

Popular brands