CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
29
User Manual
should not be repeated. The CANFD frame data length must be greater than or equal to
the sum of all CAN frame data lengths in the split rule.
Split interface layout and key functions are similar to merge. After you click
,
the split item setting window appears, as shown in Figure 4.34.
Figure 4.34 Split configuration items
The parameter items in the ANFD box indicate the source CANFD to be split. You can
specify the frame ID, frame type, data length and padding bytes, and enable bit rate
switching.
The table in the CAN box indicates the CAN list of the split target. Click
to
display the split target CAN setting window as shown in Figure 4.35. After setting, you can
add a split target CAN to the list. A CANFD message can be split into a maximum of eight
CAN messages.
Figure 4.35 CAN settings to be merged
4.3.10
Split Example
Set as shown in Figure 4.36. Split the CANFD standard frame whose ID is 0xF1 and
whose length is 64 bytes into eight CAN standard frames whose data length is 8 bytes.
The IDs are 0x00-0x07 respectively.
