ZPAD+ User Manual
7
1.3. Card Placement
RFID Cards must be placed below the fingerprint sensor in order to be recognized.
1.4. Desktop Screen
The device has different widgets on the desktop at the factory status: The basic attendance
events, which are
Check In
,
Check Out, Break In, Break Out, Overtime In and Overtime
Out,
access to the rest of the functions, which are
+ Events, Keyboard and Apps
, and the
display of the
Current Date
and
Time
1.5. Punching Operation
As said previously the basic attendance events are
Check In
,
Check Out, Break In, Break
Out, Overtime In and Overtime Out.
These are the events that are created in the device by
default. It is possible to add more attendance events which will appear on the desktop as
those or they will be accessed by the
+ Events
function, in the lower left position of the
screen.
The operation of registering a punch in the device depends on the configuration of the
verification and if the if the selection of an attendance event is set to mandatory
1.5.1. 1:N Verification
This is the default and most used configuration. If no extra configuration is done, this is
how the punches are registered in the device. This type of verification consists in the device
comparing the punch registered to all the values of the same type of punch in the
database
. The operation is as follows.
1.
Select the event that the punch is going to be set, either from the desktop, either
