ZPAD+ User Manual
38
8. T&A Settings
All functionalities regarding the
behavior of the punching
are configured in this app. Also,
the
data stored
in the device and the report of the punches (to other software or the
webserver) are configured in this app.
8.1. Punch Settings
1.
Duplicate punch period
. The device will not allow punching by the same employee
during the specified period.
2.
Camera Mode.
Specifies the behavior of the camera when punching the device. The
options are:
2.1
No photo
. The device will not take a photo when punching
2.2.
Take photo
. The device will take a photo when punching, but the photo will
not be saved
2.3.
Take photo and save on success.
The device will take a photo and save it if
the punch is successful
2.4
Take photo and always save
. The device will take a photo and save it whether
the punch is successful or not.
3.
Display user photo
. Specifies if the photo registered to the employee will be shown
when punching the device.
4.
Timeout for selected attendance event (seconds).
Specifies the time on which an
event selection (prior to punching) will be discarded if no punch is registered.
5.
Force attendance event selection
. If this option is ON, it will be mandatory to select
an attendance event on the desktop before registering a punch.
6.
Force 1:1 punching.
If this option is ON, a Code will be needed in order to identify the
employee, and a second method to effectively register the punch. For example, a Code
in order to identify the employee, and a fingerprint to register the punch.
7.
Save punch location
. The location where the punch has been registered will be saved
