ZKTeco ZK55 Series, User Manual

Page: 43 / 56

ZK55 Series User Manual 36
3.
To execute “VFDset.exe” for setting up communication between software and VFD module.
Please then follow the steps as shown in the above figure, the baud rate will show on states page
of VFD module (Note: You may check it when power on VFD module), then click “Open COM”
button.
4.
“Get Setting from VFD” button to get all the settings from ZKTeco and it’ll refresh the
“VFDset.exe” software.
5.
Select “Character Type”/ “Command Mode”/ “Baud Rate Select”/ “pass thru Mode”.
1
2
3