US922 USER GUIDE | 2016
3
Step 1:
Install the US922 and power it up.
Step 2:
Enroll users by registering his/her fingerprints or passwords.
If the US922 is operating in stand-alone mode, (where no 3rd party access con-
trol panel exists) assign users’ security privileges directly on the US922.
Note:
If using the US922 with a 3rd party Wiegand access control panel, users’
security privileges will be maintained by the access control panel and NOT the
US922.
Step 3:
After enrolling user(s), verify that his/her enrolled fingerprint or password
is recognized by the US922.
Step 4:
Configure the US922 communication settings and then download the
users’ newly enrolled fingerprints from the US922 onto a computer. Data can be
transmitted via TCP/IP or by using a USB flash drive.
Step 5:
Verify that US922 displays the correct day and time
Note:
Always back up the fingerprint templates on a computer or removable
media source. Having a “template backup” can potentially save you a lot of time.
If the US922 fails or is vandalized, having a “backup” eliminates the need of hav-
ing to re-enroll all your users.
Operating
|
Brief Overview
