3 System Menus
30
Show Message
:
indicates that this function is enabled. Messages are automatically displayed on
the screen when an alarm signal is generated.
Buzzer
:
indicates that this function is enabled. The buzzer (disabled by default) generates an
alarm when an alarm signal is generated.
Send Email
:
indicates that this function is enabled. An email is sent to the specified address when
an alarm signal is generated.
Record CHN
:
indicates that the action with alarm function is enabled. Select a channel to be
enabled when an alarm signal is generated. Select
Motion
on the
Record Setting
screen and select
Always
on the
Record Control
screen.
PTZ Act
: In this window, you can configure how the pantiltzoom (PTZ) responds to alarm signals. To
access the window, click
Set
.
Click
following a channel and choose an option from the dropdown list. The options include
None
,
Preset
,
Tour (Pointtopoint navigation)
, and
Pattern
. Then click
OK
to save the setting and return
to the
Motion Detection
window. (
Tip
: For meanings of
Preset
,
Tour
, and
Pattern
, see
3.2.2 PTZ
Control
.)
Ø
Preset
: When an alarm signal is generated, the IPC is adjusted to a preset point to display
realtime images and record videos.
Ø
Tour
: When an alarm signal is generated, the IPC navigates between two preset points and
records videos.
Ø
Pattern
: When an alarm signal is generated, the IPC navigates along the configured route and
records videos.
You can view videos in the
Record Playback
window. For detailed operations, see
3.4.2 Record
Playback
.
PostRecord
: Stop recording after alarm input stops for a while. It ranges from 10 seconds to 300
seconds.
Tour
:
indicates that a tour is enabled when an alarm is generated. Select a channel for the tour.
3.5.2
Alarm Input
To access the
Alarm Input
screen, choose
Main Menu
>
Alarm
>
Alarm Input
.
Connect alarm input devices and alarm output devices (such as lights and buzzers) properly according
to appendix B.
