BG1000 Series Barrier Gate
User Manual
P a g e
| 23
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
9
Boom Barrier Adjustments
Dimensions
9.1
Horizontal and Vertical Angle Adjustment of
9.2
Barrier Boom (Mechanical Adjustment)
Note:
The horizontal and vertical angles of the barrier boom have been adjusted
before leaving the factory. Please do not adjust them without the guidance of
professionals to avoid mechanical damage.
1.
Adjust the horizontal position of the barrier boom
The connecting boom crank will be an overlapping structure, and the two
rotation points of the connecting boom are coincident with the output shaft of
the reducer at 3 points and a line. This is the horizontal position of the barrier
boom. If you find that the barrier boom is not in level or inclined at this time,
then loosen the 2 screws of the rocker (rocker-arm), turn the barrier boom to
the level, and tighten the screws.
