http://www.zketech.com
EBD-B10H User Manual
Copyright (C) 2006-2017 ZKETECH
1. Features
The tester is designed for capacity test of 12-72V battery packs. You can set up discharging
current and cut-off voltage. Connect the machine to a computer allows you to read graphs
recording the entire testing process and to reach extensive functions.
2. Specifications
1) Input power: AC 100-240V
2) Voltage setting range: 9.00-88.00V, stepper 0.01V
3) Discharge current range: 0.50-10.00A, stepper 0.01A (to discharge battery packs lower than
24V the max current is 5A)
4) Voltage measurement: 0.10-89.00V, stepper 0.01V,
±
0.5%
5) Current measurement: 0.50-10A, stepper 0.01A,
±
0.5%
6) Capacity detection: < 10Ah, 0.001AH; 10-100Ah, 0.01Ah; > 100Ah, 0.1Ah
7) Test mode DSC: the tester can discharge the battery packs at a constant current and it stops
automatically when the testing voltage reaches below the set value.
8) Four lines: voltage and current channels separated for high test accuracy
9) LCD display: voltage, current, time, capacity, and etc.
10) PC connection: the tester can connect to a computer through a designated USB-TTL cable
for more functions, like graphs, calibration, firmware upgrade, and test circulation.
3. Connecting pattern
3.1 Battery connector
You can connect batteries to two aerial sockets on the front panel of the tester. Connect the
battery positive pole to the left socket and negative pole to the right one.
3.2 PC connection
The tester can connect with a computer through a designated USB-TTL cable (with aerial
sockets).
4. Display and setting
4.1 Buttons
SET
——
setting knob (rotate to left/right and press)
ON
——
start
