http://www.zketech.com
EBD-B10H User Manual
Copyright (C) 2006-2017 ZKETECH
4.2 Testing interface
The first line shows voltage, current and working state (ON, OF).
The second line shows testing mode (DSC), capacity (automatically switch from 0000mAh to
00.00 Ah, 000.0Ah).
The third line shows test time (hour: minute: second).
The fourth line shows only when the tester is connected to a computer.
Testing mode:
DSC- the tester supports battery discharge at a constant current. It allows you to set discharge
current and termination voltage. Discharge stops when voltage reaches below the set
termination voltage or when the set test time ends.
When you see the testing interface, press
“
ON
”
to start testing and the testing mode reads ON.
If you press one more time, the testing stops and the testing mode reads OF.
A long time press on the
“
ON
”
button will continue last test (time and capacity continue from
last records).
Stop testing and press
“
SET
”
knob for two seconds to open setting interface (this function will
be invalid when the tester is connected to a computer).
4.3 Setting interface
Discharging test:
The first line shows mode (DSC) and time (000-999 minutes, no limitation when you set 0).
The second line shows discharging current and termination voltage.
The cursor sets automatically on the current and you can move it to the option you want to
change. One press on the
“
SET
”
button to move one step to right. Rotate
“
SET
”
to left and
right to change the value. When the cursor is on the last value press the
“
SET
”
button to return
to the initial position. The value will change automatically if values set exceed limitation. Press
the
“
ON
”
button to switch to next setting option.
