Select “Options” RIGHT KEY “Set Opt.” from the main menu to display the following
information:
3.1.1 Operate Alarm Setting
It is used to set if the operation failure trigger the alarm.
3.1.2 Illegal Times
This parameter is used to set the consecutive operation failure count. An invalid opera-
tion alarm will be generated when the consecutive failure count exceeds the threshold.
Note
: The failure count is cumulated when the
fi
ngerprint lock is started next time. If the
number of cumulative failures exceeds the threshold, the
fi
ngerprint lock will generate
an invalid operation alarm; otherwise, the failure count will no longer be accumulated
after successful unlocking.
Summary
14
Operate the step 1), 2), 3), 4) in 3.1 Operation set-
tings, enter the operation menu and select “Illegal
Times”. Press Menu to enter the modify state, press
2/3 to set the value (the value by default is 10,
the permit range is 3~99), after modi
fi
cation, press
Menu to save and quit.
If the number of cumulative failures exceeds the
threshold, the
fi
ngerprint lock will automatically
power off. After device restart the
fi
ngerprint lock
will generate an invalid operation alarm of buzzer
sound. About 30 seconds it will power off auto-
matically.
3) Press 3 to select “Options”, another press Menu
to enter the menu.
4) Select “Operate Opt”, and press Menu to enter
the menu.
Operate the step 1), 2), 3), 4) in 3.1 Operation set-
tings, enter the operation menu and select “Oper-
ate Alarm”. Press Menu to enter the modify state,
press 2/3 to select Yes/No, after modi
fi
cation, press
Menu to save and quit.
