Ziton ZP2-ER-C, Installation Manual

Page: 10 / 24

6 ZP2 Series Compact Repeater Installation Manual
Fixing the cabinet to a wall
Fix the cabinet to a wall using three M4 × 30 screws and three Ø 6 mm wall
plugs, as shown in Figure 4 below.
Figure 4: Mounting hole locations
To fix the cabinet to a wall:
1. Hold the cabinet to the wall at the required installation height.
2. Ensure that the cabinet is level using the built-in spirit level and mark drill
points on the wall.
3. Drill all required holes and insert a 6 mm wall plug into each.
4. Insert a screw in position (1) and hang the cabinet onto this screw.
5. Insert screws in positions (2) and tighten.
6. Tighten screw in position (1).