Ziton ZP2-ER-C, Installation Manual

Page: 15 / 24

ZP2 Series Compact Repeater Installation Manual 11
Connecting the external power supply
Connect the external power supply to VIN1, as shown in Figure 10 below.
Note: You can connect an optional secondary external power supply to VIN2. In
the event of a failure in the primary power supply, the panel will automatically
switch to the secondary power supply.
Figure 10: Connecting the external power supply
Connecting expansion equipment
Local and remote expansion equipment may be connected to the control panel.
Connecting local expansion equipment
Connect local expansion equipment as shown in Figure 11 below. Remove the
cable knockout on each side of the chassis as required.
Equipment connected to the local expansion connectors must be installed next to
the control panel. If greater distances are required, use the remote expansion
connectors.
Figure 11: Connecting local expansion equipment