ZIROX SGM5-EL, Operation Manual, Page: 12 / 31

Electrolysis Device SGM5EL Technical data
12
5.4 Interface data
Serial interface RS-232
Transfer rate .................................. max. 19200 Baud, adjustable
Stop bits ........................................ 1
Data bits ........................................ 8
Parity ............................................. none
Handshake .................................... none
Interface commands
All characters are ASCII - characters.
Each transfer is completed with 'CR' ( CR = carriage return ).
Command Reply (response)
Description
M1 CR M1x.xxE+xx CR Measuring value channel 1
M2 CR M2x.xxE+xx CR Measuring value channel 2 (Electrolysis current [mA]
A1 CR A1x.xx CR
Voltage of the analysis cell [mV]
A2 CR A2x.x CR
Temperature of the analysis cell [°C]
u0 CR u0 x.x CR Voltage of the analysis cell [mV]
u1 CR u1 x.x CR Temperature of the analysis cell [mV]
u2 CR Not used
u3 CR
Not used
u4 CR u4 x.xxxE+xx CR Measuring value channel 1
u5 CR u4 x.xxxE+xx CR Measuring value channel 2 (electrolysis current [mA])
u6 CR u6 x.x x.x x.xxxxE+xx CR Vz [mV], Tz [°C], electrolysis current [mA]