Zirkon zahn zirkonofen 600/V3, Operator And Maintenance Manual

Page: 9 / 40

09 09
PICTOGRAMS ON THE ZIRKONOFEN 600/V3 SINTERING FURNACE
The symbols (indications) listed below are attached to the device and serve to indicate uncertain
and dangerous situations. The symbols have to be kept clean and have to be immediately
exchanged, if they detach or if they are damaged.
Please read this Operator’s and Maintenance Manual very carefully before using
VJGFGXKEGHQTVJGſTUVVKOG
Pay attention to hot surfaces when opening or touching the furnace.
If symbols or pictograms (hazard and behaviour information) on the device are not recognisable
anymore or if they came off, the operator has to replace them immediately.
CHECKLIST OF COMPONENTS - STANDARD VERSION
Packaging list - Equipment:
Zirkonofen 600/V3 sintering furnace
Firing tray
Power cable
USB cable to connect a PC to the furnace if necessary
Fuse T 20A
Fuse F 0,25A
+HQPGQHVJGEQORQPGPVUURGEKſGFCDQXGKUPQVEQPVCKPGFKPVJGUWRRN[KOOGFKCVGN[EQPVCEV[QWT
Zirkonzahn partner.