Zipro Nix, User Manual

Page: 22 / 166

22
EN
STEP 4.
Connect the connecting cable (46)
to the computer cable (36).
Next, fix the slider track (22) to the
main frame (1) using the hexagonal
bolt (14) with flat washers (8) and
the nylon nut (9). Install hole plugs
(70).
Screw on the know (2) with the flat
washer (35) and knob (15).
Attach pedals (11 L/R) to the main
frame (1) with bolts (12) and flat
washers (10).
NOTE!
The right pedal is marked
‘R’, and the left pedal is marked ‘L’.
Congratulations! You have assembled the rower!
Read the manual carefully before using the bicycle.
FOLDING AND UNFOLDING
NOTE!
Before folding the product, make sure all bolts are
tight.
NOTE! Mind your fingers when folding so that they don’t get
pinched.
Unscrew the knob (15) and knob (2) with the flat washer (35).
Fold the slider track (22) and the rear base with the cover (28)
as shown.
Finally, secure the slider (22) to the main frame (1) with
the knob (15) and the knob (2) with the flat washer (35),
and secure the cover (28) to the slider track (22) with the
knob (2).
ADJUSTMENTS
Resistance adjustment
The device has an adjustment knob for setting the resistance from 1 to 8.
To increase the resistance, turn the resistance knob clockwise. The minimum value is 1.
In order to decrease the resistance, turn the knob counter-clockwise. The maximum value is 8.
Adjusting pedal straps
The device has pedals Velcro straps. Adjust the strap length so that the foot does not move during training
and can be easily taken out. Repeat for the other pedal.