WWW.
ZIPPITY
-OUTDOOR.COM
8
ASSEMBLY
INSTRUCTIONS
ZP19002
1.
Drive a ¾” – 1¼” self-drilling hex head tek screw (NOT INCLUDED)
through the post until it meets the pipe anchor and back the screw
out of the post.
2.
Remove the vinyl burrs from the post and screw.
3.
Slowly drive the screw with force into the pipe anchor.
1.
Use a level to straighten the post.
2.
Drive a second hex head tek screw into the top of the post using
the same process shown in step 4.1.
Adjust until level.
3
Step 4 is only to be completed if you are concerned that
someone may pull your fence posts out of the ground.
STEP 4
(OPTIONAL):
SECURE
POST TO PIPE ANCHOR
1
2
3
1
2
Top View
STEP 4.2
STEP 4.1
