WWW.
ZIPPITY
-OUTDOOR.COM
6
ASSEMBLY
INSTRUCTIONS
ZP19002
Try and drive the pipe anchor as level as possible. Check level
about every 12”. After about 18”, the trajectory of the pipe anchor
is usually established, and you cannot manually pull the pipe back
to make it level.
BEST
anchor into the ground:
GOOD
BETTER
Hammer
DO NOT USE
STEP 2:
INSTALL
PIPE ANCHORS
STEP 2.1
After establishing the placement of your fence, drive your
first Pipe Anchor
(G)
into the ground. The bottom of the plastic
collar should sit just above the ground when finished.
G
STEP 2.2
Note:
Check level
in both directions.
