WWW.
ZIPPITY
-OUTDOOR.COM
7
ASSEMBLY
INSTRUCTIONS
ZP19002
Identify the location of your second pipe anchor and drive it into the ground. The distance from
the plastic collar to the next pipe should be 70 ¼” (inside to inside) or 72” (center to center).
Orient the Post
(C)
correctly with tabs at the
top, and slide the post over the pipe anchor and
into the ground.
Using a wood block (or something to protect the
top of the post), pound the post down another 2”
to 4” below the ground to prevent it from twisting
on the pipe anchor. Repeat for the second post.
Use a claw hammer to loosen 2” to 4” of dirt
around the base of the pipe anchor. This will
allow the post to easily insert itself into the
ground in step 3.3.
Step 3.1 is only to be completed if the
ground is hard.
70
¼in.
72
in.
STEP 3:
INSTALL
POST OVER PIPE ANCHOR
C
STEP 3.1
STEP 3.2
STEP 3.3
STEP 2.3
