ZIPPIE X’CAPE
17
K. FOOTREST SYSTEM
With the footrest system, Sunrise Medical offers either a single Flip-up Footplate (A), or dual footplates (B)
that are able to accomodate all of the possible heights and adjustment angles that the rider may require for
their comfort and support.
1. Basic Footrest Installation
a.
From the side, place the pivot (C) into the top of the frame tube which guides the hanger into the
correct alignment with the locking plate (D) on front frame tube.
b.
Rotate the footrest towards the front of the chair until it locks into place on locking plate.
2. Removal
a.
To remove footrest, release latch (E) by pulling lever upward or pushing lever downward.
b.
Rotate footrest inward or outward and lift.
22
21
L. SWING-AWAY FOOTREST
22
23
The footrest system can also accomodate a swing-away hanger(C) with dual footplates (B) that are both
height adjustable and angle adjustable.
Swing-in-Swing-out Hangers and Footrests
(80°
,
90°)
VIII. USE AND MAINTENANCE
22
C
21
A
B
MK-100090 Rev. C
23
C
E
D
Elevating
legrest
24
D
3. ELR Installation or Removal
To install or remove Elevating Legrest (ELR) see instructions for Swing-away
Footrest installation.
24
4. Elevation Adjustment
a. To raise legrest, lift to desired position. Legrest will automatically lock in place.
b. To lower legrest, while seated in chair, press release lever (D) down and lower legrest to
desired position. Legrest will automatically lock in place.