Zipper Mowers ZI-STE900IV, Instruction Manual

Page: 19 / 38

19
1.1 Components
ZI-STE900IV
1 ENGINE SWITCH
POSITION "RUN": ignition circuit switched on,
engine can be started
POSITION "STOP": ignition circuit switched off.
Engine can not be started
2 OUTPUT METER
Indicates current output. Indicates "FUL" if over-
loaded. In this case shut off the machine immedi-
ately
3 ECON. SWITCH
When the switch is turned on, the economic con-
trol unit controls the engine speed according to
the connected load.
4 AC SWITCH
The AC switch controls the power output system.
Position "ON": Output circuit is switched on.
Position "OFF": Output circuit is switched off
5 GROUND (EARTH) TERMINAL To link with a ground cable machine with earth
6 AC SOCKET for 220V / 1 Phase plugs
7 DC SOCKET For battery charging cable
A INVERTER GENERATOR ZI-STE900IV Inverter generator
B PEDESTIAL Place generator always on pedestial
C MAINTENANCE COVER Grants access to H, J, K
D HANDLE For transport
E RECOIL STARTER With CDI ignition
F CONTROL PANEL contains 1, 2, 3
G OUTPUT PANEL Contains 4, 5, 6, 7
H AIR FILTER
Clean it periodically. See details under section
Maintenance
I CHOKE LEVER Use Choke when starting the Engine
J PRIMER PUMP For suction of fuel from the fuel tank
K SPARK PLUG
Clean periodically. See details under section main-
tenance