MAINTENANCE
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Seite 36
Mobile Motorsense / mobile brush cutter ZI-MOS 100-4T
Seite 36
15
MAINTENANCE
A T T E N T I O N
No cleaning, upkeep, checks refueling or maintenance when machine is running or
still hot!
Be safe: Shut off the machine, let it cool down, disconnect spark plug cap from spark plug.
The machine is low maintenance and contains little parts that must undergo a maintenance
operator.
Faults or defects that may affect the safety of the machine, must be rectified immediate.
Wear sturdy gloves when installing or removing the cutting blade.
Damaged cutting tools may be straightened or welded in any case!
N O T E
Only a regularly serviced and well maintained machine can be a satisfactory tool. Care and
maintenance deficiencies can lead to unpredictable accidents and injuries.
Repairs require specialist skills should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
15.1
Cleaning
Free machine from dust and grass residues.
Machine housing with a damp cloth and if necessary clean some commercial detergent.
N O T E
The use of solvents, harsh chemicals or abrasives results in damage to the machine!
Therefore: When cleaning only water and if necessary, use a mild detergent.
Bare surfaces of the machine against corrosion impregnate (eg with anti-rust WD40)!
15.2
Upkeep and Maintenance schedule
Activities
Frequency
Loose or lost screws, nuts, bolts
Regularly prior to each operation
Damage of any part of the machine
Regularly prior to each operation
Machine cleaning
Regularly after operation
Clean spark plug
Every 25 working hours
Clean air filter
Every 20-30 working hours
