EN
5.5
Disposal
DO NOT dispose your ZI-
KGS250 in the residual
waste! Contact your local
authorities for information
about best available disposal
possibilities in your area.
Disaggregate the mitre saw into its
components
before
disposing
its
components.
5.6
Spare part order
With original ZIPPER spare parts you use
parts that are attuned to each other and
shorten the installation time and elongate
your machines lifespan.
I M P O R T A N T
The installation of non-original parts
renders warranty null and void.
So only use original spare parts!
When necessary you can demand the spare
parts list and spare part drawing from the
ZIPPER customer service.
You find the order address in the preface
of this operation manual.
6
TROUBLESHOOTING
Repair and maintenance works may only be
done by persons who have the necessary quali-
fication, experience and aptitude.
Trouble
Reason
Removal
Engine
doesn’t
run
(or
not
correctly)
(Extension-)
Cable too long or
damaged
Unplug
and
control
with
another
machine
Wrong
power
supply (voltage,
frequency)
Adjust
the
power supply to
the
machine
requirements
Carbon
brush
battered
Control,
change when
necessary
Engine damaged Foreign
impact
(overvoltage /
lightning
stroke / etc.)
or
overload.
Bring
your
machine
to
your dealer.
Saw
blade
gets
stucked
Blunt saw blade
Too hard materi-
al
Too fast cutting
Sharpening or
changing.
Conform the
cutting speed
on work piece
hardness and
engine power.
Material
kickback
Blunt saw blade
Sharpening or
changing
Wrong
running
direction of the
saw blade
Control
Wrong
cutting
angle
Wrong
mitre
angle
Wrong
adjusted
fence
See3.4
Wrong
adjusted
fence and/or saw
aggregate
See 3.4
Saw
blade
touches
the
machine
bed
Deepness
limitation adjusted
wrong
See 3.3
Laser
doesn’t
run
Flat battery
Change
the
battery
Laser
doesn’t
show the
cutting
line
correctly
Laser
adjusted
wrong
See 3.5