ASSEMBLY
37
ZI-KGS210DS
14.4.2
Fine adjustment of the angular position 90° (by means of stop angle)
•
Fix the rotary table in the 0°-position with the mitre lock.
•
Release the locking lever (1) and set the machine head
with the handle to the 0°-position (2).
•
Secure the machine head with the locking lever (1) again.
•
Place a 90° stop angle (2) between the saw blade and the
rotary table.
•
Use the adjusting screw (4) to set the angle between the
saw blade and the turntable to 90°.
•
Then check the position of the angle indicator (3, 5).
•
If necessary, loosen the screw (6) with a Phillips
screwdriver and move the pointer (3) to the exact
position 0° on the vertical angle scale (5) and then fix it
again.
14.4.3
Fine adjustment of the angular position 45° (by means of stop angle)
Inclination angle left
Inclination angle right
•
Lower the machine head and fix it with the locking bolt.
•
Fix the rotary table in the 0°-position with the mitre lock.
•
Adjusting the 45° angle on the left:
Release the locking
lever (1) and tilt the machine head with the handle to the
left into the 45° position then secure it again with the
locking lever (1).
•
Place a 45° stop angle (2) between the saw blade and the
rotary table.
•
With the adjusting screw (2) the saw blade is set at an
angle of 45° to the turntable.
•
Adjusting the 45° angle on the right:
Release the locking
lever (1) and tilt the machine head with the handle to the