Zipper Mowers 9120039232966, User Manual

Page: 28 / 59

INHALT / INDEX / INDICE/
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  28
ZI-MOS4TA
15 TROUBLE SHOOTING
W A R N I N G
Hot surfaces and rotating machine parts while the engine is running can cause
serious injury or even death. Always stop the machine before carrying out
troubleshooting work and secure it against unintentional restarting.
Trouble Possible cause Solution
Engine does not start  Incorrect starting sequence  Observe the correct starting
sequence
 Dirty air filter  Clean/replace air filter
 No fuel supply  Refuel
 Fault in the fuel line  Check the fuel line for kinks or
damages
 Engine flooded.  Screw off, clean and dry the spark
plug. Then pull the cranking rope
several times and reinstall the spark
plug
 Spark plug connector not
placed on.
 Place on the spark plug connector
 No ignition spark  Clean/replace spark plug
 Check ignition cable
Engine starts and is stalled
immediately
 Incorrect idle adjustment  Contact customer service
Machine works with
interruptions
 Carburetor incorrectly
adjusted
 Contact customer service
 Spark plug fouled  Clean/replace spark plug
 Check spark plug connector
Machine does not work with
full performance
 Machine overloaded  Too much pressure
 Cutting material too tough
 Dirty air filter  Clean/replace air filter
 Carburetor incorrectly
adjusted
 Contact customer service
Blade rotates at idling  Idle speed too high  Adjust a lower idle speed
Blade rotates but has no
power
 Choke is ON  Set Choke to OFF
Bad cuts  Foreign material wrapped,
grass around the sheet
 Shut machine off, wait until cutter
stands still, remove the winded up
material
 Long grass  Remove material
 Blunt saw blade  Sharpen or replace saw blade
NOTICE
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the problem.