ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
31
ZI-HDR40V-AKKU
16.2.1
Working with soap
•
Fill the soap into the soap bottle
•
Put the spray dispenser sprayer onto the soap bottle
•
Take the soap dispenser attachment and insert in to the
gun lance
16.3
Charger
W A R N I N G
•
Never charge
batteries at temperatures below 0 °C or above 40 °C.
•
Do not charge batteries in an environment which has high air humidity or at a
high ambient temperature.
•
Do not cover batteries and/or the battery charger during the charging process.
•
Use only original batteries in the supplied battery charger
•
Battery and charger heat up during the charging process. This is perfectly normal!
Charging the battery:
1.
Connect the charger (1) to the power supply (AC outlet) 230 V / 50 Hz
2.
Insert the battery (2) into the slots of the charger and slide into place until the battery locks
into place.
3.
Charge the battery
4.
Once the battery is fully charged remove the battery by sliding out of the charger (3)
5.
Li-Ion batteries have nor memory effect. A partial charge will not damage the battery.
LED- indicator light:
Top LED lights green: Charger is ready to charge but no battery is connected.
Bottom LED lights red: Battery is charging
Bottom LED lights green: Battery is fully charged and should be removed
LED flashes red/green: Battery is fault or overheated
Soap dis
Spap bottle
Gun lance (6)
gun (5)
