ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
30
ZI-HDR40V-AKKU
16
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the device.
N O T I C E
The batteries are not fully charged on delivery. Prior to initial operation, charge the batteries
fully. See chapter charger.
16.1
Operation instructions
W A R N I N G
•
Unplug battery before all maintenance and settings and cleanings!
•
Never remove the battery while the machine is running.
•
If the power tool is damaged or vibrates unusually, it must be repaired by a
service centre before it is used again.
•
Do not operate the machine with components rated less than the max. working
pressure
16.2
Operation
•
Insert the loaded battery into the battery compartment and close it.
•
Fill the water tank with water or connect the
high pressure generator directly to a water
supply.
•
Flow rate / working pressure can be adjusted with the selector switch.
OFF:
Off
LOW:
2 l/min at 50 bar
HIGH:
4 l/min at 70bar
•
Press the safety lock and the trigger on the trigger gun and the
water jet will be activated
