S U P E R S P O R T
35
Water Cooling
Assemble the engine with complete exhaust.
Install the rudder.
Run your silicone cooling hoses over the transom.
Route them to the lowest fittings in the cylinder head
and the exhaust flange.
Space is tight on the right side of the transom, so
using water fittings thru the transom is not a good
idea.
Use the hole in the engine rail for the exhaust flange
exit hose. This keeps it away from the hot header.
Determine where the water outlets will be, and drill
the holes.
Mount the water outlets and secure them finger
tight.
Make the water exit hoses so that they don’t touch
the exhaust. They can be really close, but can’t
touch.
Remember, in low and out high.
This pushes the air out of the cooling system.
