11
Screw in the other end of the daisy chain into
the other LED closest to the end of the controls
This will be your right LED.
Next locate the power cord from one of your
LED packages and secure it to the bottom side
of the right LED.
Cabinet Assembly
With the controls and cord facing upward.
Attach the left LED to the left support bar by
pressing the light into the light clips attached to
the inside of the support bar. Ensure that the
cut out lines of the support match the controls
of the LED and that the LED is centered along
the bar.
**Note, you will not use the onboard light
controls for your LED. You will using the supplied
external timers
***Repeat these steps for the right LED
16
18
17
