10
Cabinet Assembly
Attach the top of the unit to the front and back
supports by first ensuring the wood panel is
facing outwards. Then screw in the front and
back supports using the provided machine
screws into the pre-drilled holes. These screws
should be inserted from the outside of the
cabinet, and the back supports will be on the
inside of the top assembly.
Insert the cabinet partition by using the pre-
installed channels. Ensure that the cutout hole is
at the top back side of the cabinet.
Locate the two 4 foot LED lights. Take note of
the lights controls and screw in one half of the
daisy chain provided to the end furthest away
from the controls. This is your left LED.
13
15
14
